How well do you know fiber optic cables? If you don’t have plenty of details about the cables here are a few facts that you should know about them. Although an Optical Fiber Coloring Machine is made from glass and some of its areas require lots of care, an entire fiber is designed such that it’s capable of withstand even the most rugged installations. As an example, cat 5/5e/6/6A features a pulling tension of 25 pounds. There are many optics that can withstand over 200 pounds of pulling tension.
Research studies have shown that the fiber optic can withstand higher pulling tension than copper. In addition to this, it’s rated for larger temperature ranges and it is safe from EM/RFI interference.
Fiber Is Much More Secure
Since information is carried within the cable, the details are more secure when compared to other cables; therefore, it’s challenging to hack the data. While it’s challenging to hack the information inside the cables, it doesn’t mean that they can’t be hacked. It is because all that you should do is to get the network tap and physical accessibility cable and it will be possible to hack it.
It’s Easy to Install The Cable
While the cable was difficult to install not too long ago, stuff has changed now as technologies have changed. In order to install the cable you only have to contact installation professionals as well as the cable is going to be installed within a very short time.
The Cables Aren’t Afflicted With Environmental Conditions
Considering that the fibers carry light, they aren’t disturbed by changes in temperature, cold, rain or some other environmental condition. This is not the case with copper cables that are usually impacted by environmental conditions. For example, when it’s cold, the cables transmit data much faster than when it’s hot.
They Support Wireless
The cables are heavily utilized by telecommunication companies to transport wireless telephone signals from your towers to the central network. The fibers are preferred by many companies because of the large bandwidth and long lasting compatibility with all the network equipment.
The same as copper cables, NEC (National Electrical Code) requires Sheathing Line be marked using their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for the intended use. In accordance with NEC, a building’s inside area is divided into three varieties of sections: plenums, risers and general purpose areas.
A Plenum area is actually a building space employed for ventilation or air distribution system. In many buildings, the location above a drop ceiling or within raised floor is used since the air return (source of air) for your air conditioner. Those drop ceiling and raised floors are also where fiber cables are frequently installed. If those cables were burning, they might give off toxic fumes and the fumes could be fed to the rest of the building from the ac unit. As a result, people might be injured though they are quite a distance from the fire.
These are among the facts that you need to know about optic cables. When purchasing the units you need to ensure that you buy them from authorized dealers. After buying them you should make certain you set them up professionally. If you don’t hold the skills you should hire an experienced professional to put in them to suit your needs. We manufacture different eygmcn of optic fiber cable equipment including Optical cable sheathing line and lots of other equipment. Go to the given links to learn more about us.
When performing fusion splicing you may need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you are using a mechanical splice, you will need stripping tools, mechanical splices, isopropyl alcohol and a mechanical splice assembly tool. When hand terminating a fiber you will need 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.
Whenever a termination is finished you must inspect the end face in the connector with Optical Fiber Coloring Machine. Ensuring that light is getting through either the splice or the connection, a Visual Fault Locator can be used. This item of equipment will shoot a visible laser down the fiber cable so that you can tell that we now have no breaks or faulty splices. In the event the laser light stops down the fiber somewhere, there is most likely a rest in the glass at that point. Should there be over a dull light showing at the connector point, the termination was not successful. The lighting must also go through the fusion splice, if it fails to, stop and re- splice or re-terminate.